Research Publications

AJCE Publications

2021
  1. Jithin, M., Malay K. Das, and Ashoke De. "Phase Field Lattice Boltzmann Simulations of Water Droplet Transport in a Proton Exchange Membrane Fuel Cell Flow Channel." International Journal of Energy for a Clean Environment 3 (2021).
  2. Ganesan, P., S. Jenifer Rathna, and R. Saidur. "Application of artificial neural network to map the performance characteristics of boiler using different algorithms." International Journal of Green Energy(2021): 1-13.
  3. Kuruvila, Roshan, et al. "Optimization of solid particle erosion of 2205 duplex stainless steel under air jet using Taguchi method." IOP Conference Series: Materials Science and Engineering. 1057, (2020): 1-14.
  4. Nasar, L. J. Brauch, S.J. Vijay, C. K. Srinivas, J Jose and V. Popov. “Comparative study on H20 Steel Billets: Additive manufacturing vs. Powder metallurgy.” Physics of Metals and Metallography, 122.5 (2021): 515-516.
  5. Unnikrishnan Chakkanath Padi, T V Christy, Jerin Jose. “Tensile properties of Entada Rheedii and banana fibre hybrid reinforced epoxy resin composites.” International Journal of Multidisciplinary Educational Research, 10.1,4 (2021).
  6. Joby George et al. “Evaluation of inventory replenishment policies on supply chain performance with grey relational analysis." J. Integrated Supply Management, Inderscience, 14.2(2021): 197-227. 
2020 
  1. Jessy, K., Vishal John Mathai, and Jalumedi Babu. "Drilling of glass fibre-reinforced composites." Glass Fibre-Reinforced Polymer Composites: Materials, Manufacturing and Engineering 12 (2020): 51.
  2. Jessy, Sheik Mohammed, Vishal John Mathai, Jithin George, Sowrav Krishnan K Analysis and Modelling of Delamination in Drilled GFRP & CFRP Composites using Fuzzy Logic Controllers.” International Journal of Advance Science and Technology 29.10S (2020), 8117-8124.
  3. Denil Roy Joshua, Richu Zachariah, D M Anumod. "Performance Improvement in Mixed-Mode Solar Dryer with Addition of Paraffin-Based Thermal Energy Storage." Journal of Green Engineering4 (2020): 1403-1418.
  4. Vishal John Mathai, Jithin George, Sowrav Krishnan and K Jessy. "Analysis and Modelling of Delamination in drilled GFRP and CFRP composites using Fuzzy Logic." IPECS (2020), 25 June, TKM College of Engineering, Kollam. 
2019
  1. Taher Maatallah, Richu Zachariah, and Fahad Gallab Al-Amri. "Exergo-economic analysis of a serpentine flow type water based photovoltaic thermal system with phase change material (PVT-PCM/water)." Solar Energy193 (2019): 195-204.
  1. George Raphel, Manu Moses Jacob, and Sreerag Viswanathan. "Bioinspired designs for shock absorption, based upon nacre and Bouligand structures." SN Applied Sciences9 (2019): 1022.
  1. P R Hari, N Arivazhagan, M Nageswara Rao and A H V Pavan. "Behaviour of Alloy 617 OCC Under Hot Corrosion Conditions Encountered in Boilers in A-USC Power Plants." Transactions of the Indian Institute of Metals6 (2019): 1511-1514.
  1. P R Hari, N Arivazhagan, M Nageswara Rao and A H V Pavan. "High temperature corrosion of alloy 617 OCC at 700oC in simulated USC power plant environment." Materials Research Express7 (2019): 076557.
  1. Roy P A, Dany Chacko and George Sebastian. "Ergonomic evaluation of variable resistance wheelchair Treadmill." Kerala Technological Congress (2019), 15-17 February, Government Engineering College, Thrissur.
  1. Harikrishnan S, Ansif K Nazar, Emil Baby, Abu Sakkir Hussain and George Sebastian. "Equal Channel Angular Extrusion Characteristics on Mechanical Behavior of Aluminium Alloy." International Conference on Science, Engineering, Technology and Social Sciences (2019), 11-12 February, Kuriakose Elias College Mannanam, Kottayam.
  1. Bibin Saji, Jerrit Jolly K, Bharath S and George Sebastian. "Methods for air sterilization and purification from airborne pathogens for medical application." International Conference on Science, Engineering, Technology and Social Sciences (2019), 11-12 February, Kuriakose Elias College Mannanam, Kottayam.
  1. Albin Sunny, Alfred Biju, Allen Issac, Jerry Babu and George Sebastian. "A review on experimental investigation of aquatic propulsion using undulating fins." International Conference on Science, Engineering, Technology and Social Sciences (2019), 11-12 February, Kuriakose Elias College Mannanam, Kottayam.
  1. Mohammed Jabir, Nimin Joshy, Noel Cheriyan, Siddanth G and Jojo Saju. "Vibration Isolation Bed-Design and Fabrication." National Conference on Advances in Mechanical Engineering (2019), 10 May, Mar Baselios Christian College of Engineering & Technology, Peermade, Idukki.
  1. Allwin Shaju, Alen Mathew, K Jessy and Vishal John Mathai. "Comparative study on effect of cashew nut and saw dust as filler material in r-HDPE based composites." Second International Conference on Sustainable Energy Resources, Materials and Technologies (2019), 14-15 March, SSN College, Chennai.
  1. Christy Wilson and K. Jessy. "Machinability Characterization of Drilling GFRP Manufactured by Compression Moulding Techniques." International Conference on Advancements in Mechanical Engineering (2019), Jyothi Engineering College, Thrissur.
  1. Richu Zachariah and V N Amalnath. "Feasibility study of liquid based spectral beam splitting technique for solar panel cooling." Green Buildings and Sustainable Engineering (2019), 19-20 February, Rajagiri School of Engineering & Technology (RSET), Kochi.
  1. George Raphel, Manu Moses Jacob and Sreerag Viswanathan. "Biomimetic designs for shock absorption, based upon nacre and Bouligand structures." National Conference on Advances in Mechanical Engineering (2019), 10 May, Mar Baselios Christian College of Engineering & Technology, Peermade, Idukki.
  1. Abi Varghese and Jippu Jacob. "Design and Development of Rope & Net Assisted Papaya Plucker." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Harikrishnan S, Ansif K Nazar, Emil Baby, Abu Sakkir Hussain and George Sebastian. "Effect of Equal Channel Angular Pressing (ECAP) on the Microstructure and Hardness of Aluminium 7075 Alloy." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Bibin Saji, Jerrit Jolly K, Bharath S and George Sebastian. "Air purifier for hospital wards." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Albin Sunny, Alfred Biju, Allen Issac, Jerry Babu and George Sebastian. "An experimental investigation of aquatic propulsion using undulating fins." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Joby George and V. Madhusudanan Pillai. "Bullwhip effect quantification in a supply chain under periodic review inventory policies." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Alen Koshy Thomas, Azhar Ali, Donnie Simon, Emil Joy and K Jessy. "Investigation of 3D printed object by varying process timing." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. K Jessy and V Sreerag. "Vibration Investigation on drilling GFRP through Recurrence Quantification Analysis." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Jintu Thomas, Joel James, John Bosco Gomes, Tharun Thomas, K Jessy and Vishal John Mathai. "Investigation on the effect of flexural, flammability and acoustic properties on human hair reinforced epoxy composites." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Mathew J Joseph, Uthayakumar M, Alvin Skaria Sajan, Amal Thomas, Arun Benny and Ashwin T S. "State of the art in the die sinking EDM processes of electrically conductive ceramics." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Rahul R, Ronald Raphel, Ignasious C P, Joel Ignatius and Richu Zachariah. "Design and Fabrication of a Fully Automated Solar Panel Cleaning Module with Microfiber Brush." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Kiran George, Kevin John Kuruvilla, Rahul George Rajeev, Nandu Jayan and Richu Zachariah. "Design and Fabrication of Modified Black Soldier Fly Compost Bin." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Sherin Thampi, Alan k Joy, Albin Varghese, Anoop Raj, Alen Mathew, Merrin John Varkey and Krishna Priya Yagati. "Dissimilar metal inert gas welding characterization of aluminium and copper using zinc interlayer." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Merrin John Varkey, Josme Maria Jose, Steffi Sebi Joseph, Abin Antony, Charles Baburaj, Sherin Thampi and Krishna Priya Yagati. "Gas metal arc weld-brazing of aluminium to copper using tin interlayer." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Rejosh Cherian Philip, Richin K Philip and V Sreerag. "A review on performance, vibration, wear and effect on soil of tillage implements." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Sreerag V, Richin K Philip and Rejosh Cherian Philip. "Design and development of gender friendly pepper plucker cum berry seperator." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Kevin Cyrus Vincent, Nithin Philip, Tonymon K Tomy, Varghese Alex A, Tenny Thomas and George Raphel. "Fabrication and experimentation of a bio inspired armour plate subjected to high velocity ballistic impact." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Tony Varghese, Niveditha Prabhu, Meera Madhusudhan, Susmi Devasia, Reema Thomas and Jiss Abraham. "Development and evaluation of pulp based board from water hyacinth." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Muhammad Naseef, P. V. Umeshkumar, Tom Jose, Vipin Kumar and Vishal Mathai. "Investigations on characteristics of composites reinforced with Plantain fibres." Annual International Conference on Emerging Research Areas (2019), 18-19 July, Amal Jyothi College of Engineering, Kanjirappally.
  1. Manu Moses Jacob and Nithin Thomas. "Polyurethane based passive underwater acoustic absorber: Modelling and validation." Characterization of Polymers and Polymeric Products (2019), 17-18 September, Institute of Chemical Technology, Matunga, Mumbai.
  1. Joby George and V Madhusudanan Pillai. "Impact of inventory policies on supply chain performance and then ranking of policies using grey relational analysis." Research Conference on Operations and Supply Chain Management 19-20 (2019), 10 November, Symbiosis Institute of Operations Management, Nashik, India. 
2018 
  1. Arun Joseph Thomas, George Sebastian and Roy P A. " Design and development of manual vegetable seeding machine." International Science and Technology Journal 5 (2018): 22-26.
  1. P R Hari, N Arivazhagan, M Nageswara Rao and A H V Pavan. "Comparative studies on corrosion of alloy 617 OCC at 700oC in air and simulated coal ash environments." Materials Today: Proceedings5 (2018): 11452-11459.
  1. P R Hari, N Arivazhagan, M Nageswara Rao and A H V Pavan. " Hot corrosion of alloy 617 OCC in simulated USC power plant environment." Materials Science Forum941 (2018): 1748-1753.
  1. Roshan Kuruvila, S Thirumalai Kumaran, M Adam Khan and M Uthayakumar. "A brief review on the erosion-corrosion behavior of engineering materials." Corrosion Reviews5 (2018): 435-447.
  1. N K Francis, N M Sivaram, Sreerag V and M S Vishnu. " Investigations on the Significance of Abrasive Type and Concentration on Machining Performance in SFBM." International Journal of Mechanical Engineering Research1 (2018).
  1. Tom Sunny, Kim L Pickering, and Shen Hin Lim. "Fibre orientation distribution assessment of dynamically sheet formed hemp fibre mats by image analysis." Applied Mechanics and Materials 884 (2018).
  1. Vishal John Mathai, Harshit K Dave, and Keyur P Desai. "Analysis of dimensional inaccuracies in square cavities generated on Ti-6Al-4V using planetary EDM." International Journal of Materials and Product Technology1-2 (2018): 108-134.
  1. Aditya Shaji John, Benson Kuruvilla, Boney Reji, Delvin Jose and Abi Varghese. "Design and Modelling of Manually Operated Cardiopulmonary Resuscitation (CPR) Device." Kerala Technological Congress- Human Computer Interface (2018), 23-25 February, Sahrdaya College of Engineering & Technology, Thrissur, Kerala.
  1. Roy P A and George Sebastian. "Virtual prototyping and optimization of wheelchair using rapid upper limb assessment." Kerala Technological Congress- Human Computer Interface (2018), 23-25 February, Sahrdaya College of Engineering & Technology, Thrissur, Kerala.
  1. Roy P A and George Sebastian. "Applied biomechanics involved in the workouts for paraplegic persons." International Conference on Emerging Trends in Engineering Science and Technology (2018), 18-20 January, Government Engineering College, Thrissur, Kerala.
  1. George Sebastian and Roy P A. "Introducing an appropriate mechanical way for coconut deshelling." Frontiers of Construction Technology and Computational Mechanics (CTCM) (2018), 18-20 January, Mangalam College of Engineering, Kerala.
  1. Naina Elizabeth Sebastian, Anjana Venu, Tom Jose, Tony Saji, Sherin Thampi and Krishna P Yagati. "Dissimilar joining of aluminium alloy of copper using tungsten inert gas welding process." National conference on mechanical engineering (2018), 23-24 February, Christ University Bangaluru.
  1. Krishna P Yagati, Shibin A V, Jobin Joseph, Pablo S Ezhuparayil, Sherin Thampi and Tony Chacko. "Effect of process parameters on tig weld-brazing of alloy to galvanised steel." National conference on mechanical engineering (2018), 23-24 February, Christ University Bangaluru.
  1. Sreerag V, Bergin S Russel, Ronz Roy, Santhomas, Snery Samuel and Thomas George Paniker. "Development of energy efficient boiled egg peeler." Innovations and challenges in food processing sector (2018), 9-10 February, St. Teresa’s College (Autonomous), Ernakulam.
  1. Aditya Shaji John, Benson Kuruvilla, Boney Reji, Delvin Jose and Abi Varghese. "Review of Cardiopulmonary Resuscitation (CPR) Machines." National Conference on Emerging Technologies (2018), 17 March.
  1. Anandan R, P Sengottuvel, K Jessy and Karunakaran P. "Experimental investigations and numerical simulations of friction stir welding of Aluminium 1100 alloy." 1st International Conference on Safe Biodegradable Packaging Technology (2018), 24-26 July, Might Partnership Hub, Cyberjaya, Malaysia.
 2017 
  1. Gurunathan Saravana Kumar, and Subin Philip George. "Optimization of custom cementless stem using finite element analysis and elastic modulus distribution for reducing stress-shielding effect." Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine2 (2017): 149-159.
  1. Vishal John Mathai, Harshit K Dave, and Keyur P Desai. "Experimental investigations on EDM of Ti6Al4V with planetary tool actuation." Journal of the Brazilian Society of Mechanical Sciences and Engineering9 (2017): 3467-3490.
  1. Vishal John Mathai, Harshit K. Dave, and Keyur P. Desai. "Study on effect of planetary and diagonal tool actuation strategies on distortion of features machined by EDM process." Journal of Manufacturing Engineering2 (2017): 62-67.
  1. Vishal John Mathai, Avin James, Darren J. Francis, Anish Mathew and Abhijith Cherian. "Effect of process parameters and wall angle on quality and accuracy of features manufactured by single point incremental forming." Indian Journal of Science Research2 (2017): 225-227.
  1. Sengottuvel P, Muneeswaran M, K Jessy and Dinakaran D. "Fuzzy rule based modeling of drilling parameters for tool wear in drilling gfrp composites." International Journal of Pure and Applied Mathematics 116 (2017): 47-53.
  1. Vishal John Mathai, Harshit K. Dave, and Keyur P. Desai. "End wear compensation during planetary EDM of Ti–6Al–4V by adaptive neuro fuzzy inference system." Production Engineering1 (2018): 1-10.
  1. Chithra Pournami, B Sreenath, and Richu Zachariah. "A comprehensive review on the recent advancements in PV panel cooling techniques using phase changing materials." IEEE International Conference on Intelligent Techniques in Control, Optimization and Signal Processing (2017), 23-25 March, Kalasalingam University, Tamil Nadu.
  1. Amalnath V N, and Richu Zachariah. "A simple control unit for temperature dependent forced water cooling in solar CPV/T collector." IEEE International Conference on Intelligent Techniques in Control, Optimization and Signal Processing (2017), 23-25 March, Kalasalingam University, Tamil Nadu.
  1. Riby John, S Sheik Mohammed, and Richu Zachariah. "Variable step size Perturb and observe MPPT algorithm for standalone solar photovoltaic system." IEEE International Conference on Intelligent Techniques in Control, Optimization and Signal Processing (2017), 23-25 March, Kalasalingam University, Tamil Nadu.
  1. Jibin Chacko Thomas and Abi Varghese. "Effect of Various Parameters Affecting Throughput of an Auger Conveyor: Review." Kerala Technological Congress (KETCON-2017 Energy Technologies) (2017), 13-14 January, Mar Athanasius College, Kothamangalam, Kerala.
  1. M Uthayakumar, Mathew J Joseph, S Suresh Kumar, Ramesh Kuppuswamy and Rajesh Kannan. " A review on the state of the art of the die sinking EDM of electrically conductive ceramics." International Conference on Automotive systems, Agricultural Equipments and Manufacturing (2017), 24-25 March.
  1. Rakesh Reghunath and Soney C George. "Mechanical properties and molecular transport phenomena of epoxidized natural rubber." Kerala Technological Congress (KETCON-2017 Energy Technologies) (2017), 13-14 January, Mar Athanasius College, Kothamangalam, Kerala.
  1. Vishal John Mathai, Harshit K Dave and Keyur P Desai. "Investigation on effect of process parameters on dimensional accuracy of features generated by planetary EDM." 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR) (2017), 16-18 December, College of Engineering, Pune, Maharashtra.
  1. Sedharth, Kevin Shaji, Rinto Mathew, Shinoj Thomas, Nikhil S Chingamparambil, Arun Thomas and Rakesh Reghunath. "Study on tensile characteristics of carbon- kevlar hybrid composite and kevlar epoxy composites." iCEAME- Annual International Conference on Emerging Research Areas (AICERA) (2017), 13-15 July, Amal Jyothi College of Engineering, Kanjirappally, Kerala.
  1. Alex K Babu, Anthea Judette, Alwinson Kuriakose, Althaf Easa, Rakesh Reghunath and Soney C George. "Development of super hydrophobic sponge for oil spill separation." iCEAME- Annual International Conference on Emerging Research Areas (AICERA) (2017), 13-15 July, Amal Jyothi College of Engineering, Kanjirappally, Kerala.
  1. Richu Zachariah, Blessy Joy and Jubin Varghese. "Experimental Investigations on a Serpentine tube type water based PV Thermal system with and without reflectors." iCEAME- Annual International Conference on Emerging Research Areas (AICERA) (2017), 13-15 July, Amal Jyothi College of Engineering, Kanjirappally, Kerala.
  1. Surej Kulangara Abraham and Richu Zachariah. "A review on e-waste hazards, management and recycling techniques." National Conference on Waste to Energy, Carbon Capture, and Storage (2017), 3-5 August, National Institute of Technology, Rourkela.
  1. Tony Varghese, Thomas Tarian, Saju Sebastian and Sreekumar K. "Stabilisation treatment for Martensitic stainless steel used for space applications." ADMAT (2017), 14-16 December, Leela Ravis Kovalam, Kerala.
  1. Vishal John Mathai, A James, D J Francis, A Mathew and A Cherian. "Effect of process parameters and wall angle on quality and accuracy of features manufactured by Single Point Incremental Forming." Second International Conference on Recent Innovations in Engineering and Technology (2017), 21-22 December, ASTRA Hyderabad.
2016 
  1. Blessy Joy, J. Philip, and Richu Zachariah. "Investigations on serpentine tube type solar photovoltaic/thermal collector with different heat transfer fluids: Experiment and numerical analysis."Solar Energy 140 (2016): 12-20.
  1. Abi Varghese, and Jippu Jacob. "A Study of physical and mechanical properties of the indian coconut for efficient dehusking."Journal of Natural Fibers (2016): 1-10.
  1. Rohit Rajeev, M. Govind, and Bipin Balaram. "Effect of external force on the dynamics of nonlinearly coupled self excited oscillators."Procedia Engineering 144 (2016): 1007-1014.
  1. R K John, S L Alex, S P George, Vishnu Vijayan and Mathew J Joseph, “A novel apparatus for imparting vibratory weld conditioning to mechanically joined weldments”, Technology letters1 (2016): 14-17.
  1. P V Harikrishnan and Richu Zachariah. “Computational studies on performance of a mixed mode solar dryer with thermal storage”. International Journal of Engineering Sciences & Research Technology 7 (2016): 235-243.
  1. Mathew Alex A, Naveen Thomas, Kurias M George, Noble Emmanuel, Sherin Thampi and Rijesh M. " Feasibility of using TIG welding to join dissimilar metals CP-copper & amp; 316 stainless steel." National Level Symposium, Materials Characterisation and Manufacturing (2016), 18-19 August, Padre Conceicao college of engineering, Goa.
2015 
  1. Reju Mathew Reji, Manu Mohan, U. Harikrishnan, Vinu Thomas Joseph, K. Sreekumar and Tony Varghese. "Simulation of metallurgical failure of a maraging steel tension rod."Transactions of the Indian Institute of Metals 1 (2015): 35-40.
  1. V V Monikandan, Jibin C Jacob, M A Joseph and P K Rajendrakumar. "Statistical Analysis of Tribological Properties of Aluminum Matrix Composites Using Full Factorial Design."Transactions of the Indian Institute of Metals 1 (2015): 53-57.
  1. Richu J Babu, Sony Mathew, Sharon Rony Jacob, Soney C George and Jibin C Jacob. "Optimization of Human Hair Length in a Natural Rubber Based Composite."Transactions of the Indian Institute of Metals 1 (2015): 87-90.
  1. K Antony, M. S Prasad, " A Comparison of Corosion Resistance of Stainless Steel Fabricated with Selective Laser Melting and Conventional Prossing". Chemtech 6 (2015): 2632-2635.
  1. Binu Thomas, Eby David, and R. Manu. "Empirical modelling and parametric optimisation of surface roughness of silicon carbide advanced ceramics in surface grinding." International Journal of Precision Technology3-4 (2015): 277-293.
  1. Rakesh Ragunath , M Lakshamanan, K M Mini, “Low velocity impact analysis on a glass fiber reinforced composites with varied volume fractions”. IOP Science -International Conference on Materials Science and Technology 73 (2015): 899-1757.
  1. J M Gicky, S Tom, “A review on design developments in bicycle”, IRJET 2 (2015).
  1. K Antony, P Varghese, M P Siva, J Febin, M V John, A Sreekanth, “The Effect of Repeated Repair Welding on the Corrosion Behaviour of Austentic Stainless Steel and Mild Steel Disimilar Weldment”, Bonfring- Proceedings of International Conference on Advances in Materials, Manufacturing and Applications (2015).
  1. J M Gicky, S Tom, “Bicycle with Internal Gear Transmission Systems”, IJMEIT 3 (2015): 1519-1523.
  1. Richu Zachariah, Blessy Joy, “Experimental Investigation and comparative study of PV thermal water-ethylene glycol collector and PV system”, International Journal of Current Engineering and Scientific Research 2 (2015). 
2014 
  1. Abi Varghese, and Jippu Jacob. "A review on the coconut husking machines." International Journal of Design and Manufacturing Technology 5 (2014): 68-78.
  1. Z Anto, B Binu, K KPurushothaman, P Jeby, “Acoustic Emission Signal Analysis of 15CDV6 Pressure Vessel Using Pattern Recognition Method”, NDE-India 20 (2014): 1435-4934.
  1. R Rakesh, S Korah, “Analysis of Internally Pressurised Thick Walled Cylinders”, JBAER 1 (2014): 88-93.
  1. S Baby, T S Simil, K G Samuel, “Elastic property evaluation of hot structural composites used in re-entry space modules”, IJSETR 3 (2014): 2278-7898.
  1. B J Thomas, J Babu, “Design of safety systems and management in petrochemical industry”, IJIRST 1 (2014):2349-6010.
  1. Amal Sajikumar, Mathew Joseph, M M John, “Determination of natural convective heat transfer coefficient of air over an isothermal surface”, IJAEFEA 1 (2014).
  1. Abi Varghese, Jippu Jacob, “A study on the KAU Coconut husking tool”, ICMMD (2014): 4799-5202.
  1. A Tom, M P Geo, G Joseph, J Jose, Mathew J Joseph, “ Design and analysis of LPG cylinder”, IJEAS 6 (2014): 17-3.
  1. A Anto , B K Varghese , “Design and stress analysis of a simplified creep testing machine”, SJIF (2014): 2348-6406.
  1. M V Rabeeh , S Vysakh , “ Design of shell and tube heat exchanger using MATLAB and finding the study state time using energy balance equation” , IJAME 4 (2014): 2250-3234.
  2. Kurien Antony “Optimizing the process parameters of laser welding of stainless steel powders”, IJAER 9 (2014): 973-4562. 
2013 
  1. K R Arjun , M S Jaymohan , “Application of simulated annealing in flow shop scheduling” , IJIRSET 2 (2013): 2319-8753.

© Amal Jyothi College of Engineering